94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed

94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed
94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed
94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed
94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed
94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed

94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed

If you do not you will receive an air tank that mounts inside your bag! This kit includes a 200 psi holding tank for air.

This custom kit has been installed on 100s of bikes and has been proven to be bullet proof. Install and ride with no worries! The ride is absolutely great!! In most cases people say it rides better than the stock setup.

Shocks measure 14.35" extended & 9.75" compressed. Find your sweet spot and ride.

We do not recommend the use of any rear lowering kits in conjunction with this kit as there will be clearance issues with the fender. Everything is pre-wired & pre-plumbed.

Electrical & air line schematics included. All parts are of premium quality!! -Why pay more for others when you can get a better kit for a lower price!! -This kit will out perform and out last any manufactured kit! See our other listings for compressor brackets, upgraded switches and gauges.

The air holding tank is available for mounting inside or under the saddle bag. You can not mount the air holding tank under a bag if you have a muffler under it.

If no note is included we will send an in bag tank. Air piston inserts into factory fork tube, top of fork tube is plumbed for air supply and air pressurizes above the air piston for adjustability. Factory spring is shorted to provide more travel. Fits all factory 41mm flh forks. Provides Full Oem length when aired up.

Not limited by a cylinder body. Adjustable ride via more or less air pressure.

Max psi needed is 160, will operate with less but slower. You can use this in any Bagger application using factory fork tubes, any leg will work. Street Glide, Electra Glide, Road Glide, Road King FLT, FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTUC, FLHT.

09-16 without ABS: Compressor will mount under right hand side cover. 09-16 with ABS: Compressor will mount to right rear vertical saddle bag bracket. You are responsible for fabrication of bracket. 94-08: Compressor will mount under and to battery box. The large switch pictured with the kit has been replaced with a micro switch in the last photo.

Your fork tubes must be inspected for grooves, knicks or any type of defect that may prevent an air tight seal. Improper installation of any AIR RIDE can cause server repercussions!! The bolts and washers pictured here are not needed or included.

The finish on the shocks is NOT show quality! We suggest that you plan on having the shocks painted for a show finish! The item "94-13 HARLEY DAVIDSON TOURING INSTANT FRONT & REAR AIR RIDE KIT WIRED & PLUMBED" is in sale since Wednesday, May 27, 2015. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Other Brakes & Suspension". The seller is "sterlingmotorsinc" and is located in Sterling, Illinois.

This item can be shipped worldwide.


94-13 Harley Davidson Touring Instant Front & Rear Air Ride Kit Wired & Plumbed


Motor Cycle Parts   Map   Contact Form   Privacy Policy   Terms of service