Frame has a 30° rake, +2" raised neck, and 10.75" between the rigid rear axle plates. Frame is set up for disc brake and uses a 1987-later style rear caliper.
Utilizes 1986-89 soft tail tanks. Will accept a 230 rear tire with chain drive or 200 rear tire with belt or chain drive, rigid style rear axle, 3/4 axle plate collars, transmission mount plate, inner primary cover flange spacers, and extended sprocket shaft and nut set, all related parts available separately. Will not accept a stock seat post. When using a chain drive with a 230 tire, the use of #17-0859, a 1 offset plate and a #19-0105 sprocket is required. When using a belt or chain drive with a 200 tire, the use of #17-0860, a 3/4 offset plate and a #19-0104 sprocket is required.When using a Shovelhead, Evolution, or Twin Cam engine, it is required to use a #42-0617 tin inner primary. When using with a TC-88 engine order #51-0625 rear frame mount adapter plate In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame. When using the #42-0617 tin inner primary, the use of #19-0570 is needed if using a #17-0859 transmission plate 1 offset and a #19-0105 sprocket. When using the #42-0617 tin inner primary, the use of #19-0569 is needed if using a #17-0860 transmission plate 3/4 offset and a #19-0104 sprocket. Suggested to use with #44-1942 axle.
The item "V-Twin Retro Replica Panhead Shovelhead Evolution 30° Straight Leg Rigid Frame" is in sale since Monday, December 7, 2015. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Frames". The seller is "americanclassicmotors" and is located in Zieglerville, Pennsylvania.This item can be shipped worldwide.